Protemp PT-32-TTC Manuel d'utilisateur télécharger pdf (Page 12)

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR

WHILE CONNECTED TO A FUEL SOURCE

Troubleshooting Guide

Locating Your Serial Number:

Your serial number can be found in the bottom left hand corner of the heater’s instruction hang-tag.

It will begin with the letters “HTT” followed by 8 digits. For Example: HTT12345678. Have your Serial

Number ready before calling customer service at 800-641-6996.

Problem Possible Cause(s) Solution

Unit will not light.

1. Valve on propane cylinder

closed.

2. Propane cylinder empty.

3. Regulator not in (HI) position.

4. Defective regulator

1. Open cylinder valve by turning

COUNTERCLOCKWISE.

2. Rell cylinder.

3. Turn regulator to (HI) position.

4. Replace regulator assembly.

Burner will not stay lit

when gas valve plunger

is released

1. Tip switch activated or

defective.

2. Wire terminal connections

unplugged.

3. Defective thermocouple.

4. Defective MPU.

1. Place heater in upright position

or replace tip switch.

2. Check wiring connections.

3. Replace thermocouple.

4. Replace MPU.

Excessive ames coming

out of burner, not glowing

red. Flames ashback

/ burn inside the mixing

tube.

1. Air inlet holes blocked or

covered.

2. Burner screen damaged.

3. Gap between burner screen

and burner can.

1. Clear obstructions from

2. Replace Burner screen.

3. Replace or repair burner head

assembly.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Protemp PT-32-TTC Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Radiateurs Protemp PT-32-TTC